CARTRIDGE SEAL TYPE - LIE/706
For Dry Applications
|
Fully pre-assembled cartridge seal which can be directly installed on any type and make of pumps. This seal has an integral sleeve with gland and does not require any dimensional adjustments during installation. Top & side entry seal, better for dry & high pressure application, single and double seal can be provided in double back to back or tandem seal. |
For High Pressure |
|
Application
Slurries, Abrasives, Sludge, Syrup, Pulp & Paper, Boiler Feed Water. |
| Temperature |
: |
-50 Deg. Celcius to 250 Deg. Celcius |
| Pressure |
: |
40 bar (580 psi) |
| Speed |
: |
36 m/s |
| Size |
: |
3/4" to 5" |
| M.O.C. |
| Rotary Face |
: |
High Density Carbon,Tungsten Carbide, Silicon carbide, Carbon. |
| Stationery Seat |
: |
Silicon Carbide, Tungsten Carbide, H.A. Ceramic, Stellite, Chrome Steel. |
| Flexible Parts |
: |
PTFE & Viton Rubber. |
| Metal Parts |
: |
S.S.316,Hastalloy C & B, Alloy-20. |
|
AGITATOR SEAL TYPE - LIE/708
Agitator Seals are low speed and successfully used for agitators, mixers, vessels, Top & Bottom mounted etc.
These seals are further efficiently used for applications involving viscous or dry, sticky media.
|
 |
Application
Paints, mixer, Driers, Pharmaceuticals, Pulp & papers, Food processing etc. |
| Temperature |
: |
-50 Deg. Celcius to 300 Deg. Celcius |
| Pressure |
: |
Upto 75 bar (360 psi) |
| Speed |
: |
3 m/s |
| Size |
: |
3/4" to 5" |
| M.O.C. |
| Rotary Face |
: |
High Density Carbon,Tungsten Carbide, Silicon carbide. |
| Stationery Seat |
: |
Silicon Carbide, Tungsten Carbide, Stellite |
| Flexible Parts |
: |
PTFE, Viton Rubber. |
| Metal Parts |
: |
S.S.316, Hastalloy C & B, Alloy-20. |
|
|
|
